			     Free 4DOS

	       Introduction and Installation Guide


     Copyright  1988-2004, JP Software Inc., Worton, MD, USA
     Revised 2008-11-7, Klaus Meinhard and Luchezar Georgiev.


You can use 4DOS with all versions of MS-DOS and PC DOS from 2.0
through 7.1 and above, including Windows 95 and 98 ("MS-DOS 7" is
is the DOS portion of Microsoft Windows 95/98).  You can also use
it with all versions of DR DOS / Novell DOS / OpenDOS from 3.4
through 7.0 and above, with FreeDOS, ROM-DOS, PTS-DOS or most other
DOS variants, and in DOS sessions started under Windows 95/98/ME
and under Windows 3.x and OS/2.

Once you have 4DOS installed, you can learn to use it at your own
pace.  4DOS has more than 110 commands and hundreds of enhanced
features, but you don't have to learn them all, or learn them all
at once.  Relax, enjoy the program's power, and browse the manual
occasionally.  Press the F1 key whenever you need help.  These
programs will soon become an essential part of your computer, and
you'll wonder how you ever got along without them.

How to Use This Manual

     This manual is only one part of the documentation that you
     will need for 4DOS.  It introduces the product and helps you
     install it correctly on your computer.  It also gives you
     specific information about using the program in your
     particular environment (for example, using 4DOS under Windows
     98).

     The second and third parts of the documentation are the online
     help and the reference manual.  They contain complete
     information about the commands and features of 4DOS.

     You should start with this introductory manual whether you are
     new to the program or you are upgrading from a previous
     version.  Once you have successfully installed the program,
     move on to the online help or reference manual for detailed
     information on commands, features, and configuration.

     The first three chapters of this manual introduce 4DOS and
     help you install the program and its built-in help system.
     Chapters 4 and 5 contains additional details about each
     operating environment.  You are encouraged to review the
     material in the later chapters to see what applies to you
     (particularly if you are using 4DOS under Windows 95/98/ME).
     However, in many cases you will not need the information in
     Chapters 4 and 5 unless you are working at a more technical
     level, or run into some unexpected difficulty.

     4DOS also includes complete online help for all commands.	The
     4DOS help system can be configured to link to help on standard
     DOS commands as well, if the corresponding help files and
     programs are available on your system.  The online help
     provides much of the same information that is available in
     this manual and the reference manual, but in an electronic
     form which you can access quickly.  The online help also
     includes details about compatibility with other products, and
     additional technical information.	See Chapter 3 for more
     information about the online help.

     Check README.TXT for last-minute notes on the current release,
     or if you are installing a downloaded update to 4DOS.

     This version of 4DOS is free and unsupported by JP Software.

     At the Usenet group comp.os.msdos.4dos, the maintainer and
     experienced users will try to help with any questions.

     Updates for the free 4DOS can be found at http://4dos.tk/
     (Luchezar Georgiev's 4DOS Revived! site).



Chapter 1 / Introducing 4DOS

4DOS is a command interpreter or "shell."  That means that it
displays a prompt, waits for you to type something, and then reacts
to your commands (the C:\> prompt is used in this manual, but you
can customize the prompt to use any format you prefer).  4DOS
replaces the default command interpreter that are supplied with
your operating system (COMMAND.COM for DOS and Windows 95/98.)

4DOS was designed so that you don't have to change your computing
habits or unlearn anything to use them.  If you know how to display
a directory, copy a file, or start an application program from a
command prompt, you already know how to use JP Software's command
interpreters.  If you're not used to using the command line, you'll
quickly come to value its power and flexibility, and appreciate
4DOS's comprehensive online help and the way it makes the command
prompt straightforward and easy to use.

4DOS understands all of the commands you already know and adds to
them.  Its purpose is to make the command line friendlier, easier
to use, and much more powerful and versatile without requiring you
to use or learn a new program, a new set of commands, or a new
style of work.

In this section, a few of the features built into 4DOS are
introduced.  There is no room to list them all or to explain all
of the options available in each; that's for the online help and
Reference Manual.  This section will just give you a taste of what
you can expect from your computer once you have your new command
interpreter installed.

As you read this section, remember that you don't have to use any
of these features except the ones that appeal to you.  Learn the
parts that will make your computer easier for you to use, and add
to your repertoire as you need them.

Built-In Commands

     The command line is the heart of 4DOS.  It is here that you
     type commands for the program to execute, and here that the
     program displays the output of each command.

     4DOS supports every command you already know, add to the
     features of each command, and add dozens of new commands.

     For example, the traditional DIR command has about a dozen
     options.  The DIR command in 4DOS has the same options plus
     about 20 more.  With the enhanced DIR command, you can:

	Display a list of files in 1, 2, 4, or 5 columns with the
	  commands:

	  c:\> dir
	  c:\> dir /2
	  c:\> dir /4
	  c:\> dir /w

	Use colors to indicate different kinds of files, display
	  file descriptions (text to remind you of the contents of
	  a file) along with file names, and sort files according
	  to several different criteria.

	Use wildcards to display all file names that start with
	  the letter "A", end with the letter "A", or have an "A"
	  anywhere in the name:

	  c:\> dir a*
	  c:\> dir *a
	  c:\> dir a

     That's just an example of some of the enhancements added to
     one command.  4DOS has added enhancements to virtually every
     command you've used before and include dozens of new commands
     as well.  You don't have to learn to use them all, but you
     will find many commands and enhancements that will make your
     computer more powerful and easier to use.	For example:

	COLOR lets you set the default colors to use on your
	  display:

	    c:\> color bright white on blue

       Additional features let you customize the colors you use for
	  parts of the display, for input and output, and for
	  specific kinds of files.

	LIST displays the contents of files in text or
	  hexadecimal mode, lets you search a file, and can print
	  either an entire file or a single page:

	    c:\> list readme.txt

	The FFIND command searches for files based on their names
	  and their contents.  For example, to find all files on
	  drive C: with the string "now" somewhere within their
	  names:

	    c:\> ffind /s now

       To find all .TXT files in the current directory which
	  contain the string "then" somewhere in the file:

	    c:\> ffind /t"then" *.txt

	SELECT lets you pick the files you want to work with from
	  a "point and shoot" display.  This command, for example,
	  lets you select files from the current directory to copy
	  to the floppy in drive A:

	    c:\> select copy (*.*) a:

	EXCEPT - and a related feature, "exclude" ranges - let
	  you work with all of the files in a directory except
	  those that you want to exclude.  This command copies all
	  files from the current directory to drive A: except
	  backup (.BAK and .BK!) files:

	    c:\> except (*.bak;*.bk!) copy . a:

The Command Line

     4DOS is much more than just a collection of commands.  They
     include a number of features that make the command line easier
     to use:

	Interactive help appears whenever you ask for it, and any
	  time you use a command incorrectly.  Type:

	    c:\> help

	  when you need help - or just press F1.  If you have typed
	  part of a command, F1 displays help on the first word on
	  the command line.  Ctrl-F1 displays help for the word at
	  the cursor.

	The command line works like a single-line word processor.
	  You can edit any part of the line at any time before you
	  press Enter to execute it or Esc to erase it.  You can
	  move the cursor left and right by a character or a word,
	  jump to the beginning or end of the line, or delete,
	  insert, or type over characters anywhere on the line.

	4DOS keeps track of each command you execute.  You can
	  display past commands, execute them again, or make
	  changes before you execute them.  The past commands can
	  appear on the command line if you press  or in a pop-up
	  window if you press PgUp.

	If you don't know or want to type a complete file name as
	  part of a command, you don't have to.  Just type part of
	  the name and then press Tab:	a matching file or
	  directory name will appear on the command line.  Press
	  the Tab key again to see the next matching file.  To
	  choose from all matching files in a pop-up window, press
	  F7 or Ctrl-Tab.

	The ability to complete filenames easily can be invaluable
	  on a drive with long filenames - all you have to do is
	  type part of a file or directory name and press Tab.	The
	  command interpreter fills in the rest, including any
	  quotation marks required for long filenames.

	4DOS remembers each directory you have visited.  There
	  are many ways to return to previous directories; the
	  easiest is to press Ctrl-PgUp to view past directories in
	  a pop-up window.  Select the directory you want, press
	  Enter, and you will immediately change to that directory,
	  even if it is on a different drive.

	Our programs also use an extended directory search
	  "database" that will help you move, almost instantly, to
	  any directory on any hard drive on your system when you
	  type just part of the directory name.

	Our programs include features that let you select files
	  by size, date, and time.  For example, this command makes
	  it simple to copy all files in the current directory that
	  have been updated in the last week to a backup disk:

	    c:\> copy /[d-7] . a:\

	Or to delete all .BAK files that are greater than 1 MB in
	  size:

	    c:\> del /[s1M] *.bak

	With a simple change you can make the command delete the
	  same files, but from the entire drive rather than just
	  the current directory (use a command like this with
	  caution!):

	    c:\> del /[s1M] /s *.bak

	4DOS lets you associate file extensions with
	  applications.  For example, it's easy to start your word
	  processor and load a letter when you type the name of a
	  .LTR file:

	    c:\> set .LTR=c:\wp\wordproc.exe

	After you have defined the association, you can start your
	  word processor and have it load your letter to Mom,
	  MOM.LTR, with this command (assuming the file is in the
	  current directory):

	    c:\letters> mom

	You can also run multiple commands at one time.  If you
	  know the next 3 commands you need to run, you can type
	  them all at once and then sit back while they are
	  executed.  For example, to copy all of your .TXT files to
	  drive A: and then display the directory of drive A:

	    c:\> copy *.txt a: ^ dir a:

Configuration

     Only you know how you use your computer, or how you would like
     it to work, so 4DOS has been made as flexible as possible.
     You can configure almost every part of it to suit your needs
     or your whims.  To start the configuration utility, type:

       c:\> option

     For example, you can decide what colors to use for what
     purposes, how file names are displayed in command output, and
     command line editing details like the size and location of
     pop-up windows, or the shape of the cursor.

     If conventional memory is tight on your DOS computer, you can
     configure 4DOS to squeeze out every possible byte, using
     extended (XMS) memory, expanded (EMS) memory, upper memory
     blocks (UMBs), or conventional memory.  4DOS uses as little as
     256 bytes of conventional memory, leaving as much room free as
     possible for memory-hungry DOS application programs, memory-
     resident utilities, and games.

Aliases and Batch Files

     Two of the most popular and powerful features, aliases and
     batch files, were left for last.

   Aliases

     Aliases are short sequences of commands that are stored in
     memory for very fast execution.  They can assign complex tasks
     to simple names or single keystrokes, define new commands, and
     set defaults for internal commands and for almost any
     application on your computer.  They are the primary method
     offered for customizing your command line to suit your needs.

     Here are a few examples of how you could define simple aliases
     to make the command line easier to use.  The first two provide
     shorthand names for the DIR command - D displays a directory,
     and D2 displays a 2-column directory, sorted vertically, with
     a pause at the end of each page:

       c:\> alias d dir
       c:\> alias d2 dir /2pv

     Once these definitions have been entered, all you have to do
     is type D or D2 at the prompt to execute the corresponding
     alias.

     You can also define aliases as shorthand ways to execute
     applications, usually without having to add the application's
     directory to your PATH.  For example, this alias allows you to
     just type EDIT to run your editor, even if its directory is
     not on the PATH:

       c:\> alias edit e:\edfiles\editor.exe

     You can put a whole group of commands into an alias so that
     you can invoke them without typing each one.  This alias
     changes directories, runs the FINPROC program, and changes
     back to the original directory (the back-quotes [`] are used
     to enclose an alias when it contains more than one command).
     This alias should be entered on a single line:

       c:\> alias monthly `pushd c:\monthly ^ finproc & popd`

     This short description explains only the basics of what
     aliases can do.  Like most 4DOS features, aliases can be as
     simple or as complex as you like.	You can save your aliases
     in a file and reload them each time the command interpreter
     starts (otherwise, you'd have to redefine them each time);
     assign aliases to keystrokes so they can be invoked quickly;
     write aliases which use other aliases; and use aliases within
     batch files.  For complete information on aliases, see the
     online help, the reference manual, and the ALIAS command in
     Chapter 7 of the reference manual.

   Batch Files

     A batch file or batch program is a text file that contains a
     list of commands to execute.  4DOS reads and interprets each
     line as if it had been typed at the keyboard.  If you're an
     experienced batch file programmer, or if you want an easy
     introduction to batch file programming, you won't find
     anything more powerful than its built-in batch language.

     The batch language includes simple commands to display menus,
     boxes, lines, and colored text to dress up your batch file
     displays; a full range of user input commands; over 140 built-
     in variables that let your batch files test system
     configuration, device status, and free memory and disk space;
     and more than 150 built-in functions that let your batch files
     read from files, find the date, perform calculations, and
     manipulate strings.

     4DOS batch files can include subroutines, loops, IF/THEN/ELSE
     logic, and even exception handling.  And you can run them in
     single-step mode to debug them easily, learn exactly what each
     line does, or view changes to environment variables and other
     information as the batch file executes.

     Here are a couple of examples of simple batch files.  The
     first example displays several pieces of information about
     your system status, using built-in variables provided with
     4DOS:

       cls
       echo System status as of %_date at %_time:
       echo CPU:  %_cpu
       echo Screen size:  %_rows x %_columns
       echo Boot drive:  %_boot
       echo OS version:  %_dosver
       echo Command processor version:	%_4ver
       echo Country code:  %_country

     The next example clears the screen, displays a short menu,
     accepts some input from the user, and displays the result.
     The TEXT command displays a block of text on the screen, the
     SCREEN command positions the cursor, and the INKEY command
     accepts a single keystroke from the user:

       cls
       screen 5 0
       text
       Choose an option:
	       1 - Word processing	3 - Load the network
	       2 - Spreadsheet
       endtext
       screen +1 0
       inkey Enter your selection: %%sel
       screen +2 0
       echo You entered: %sel


Chapter 2 / Installation

4DOS normally comes with an installer that makes product
installation simple and straightforward.  It is recommended that
you follow the directions for installation below.

If you prefer to set up 4DOS yourself, you can extract the
installation files and perform all installation steps manually.
Manual file extraction and installation is covered in detail in
Chapters 4 - 5.

Preparing for Installation

     It is strongly recommended that you install your new version
     of 4DOS in a new directory or folder, not in the same
     directory as a previous version, or a directory used by other
     software.

     When installing 4DOS under Windows 95/98/ME, it is also
     strongly recommend that you use a short name for the 4DOS
     directory (i.e. a name where each element of the path uses no
     more than eight characters for the name and three characters
     for the extension, with no white space or other special
     characters).  If you install 4DOS in a directory with a long
     name, you will have to determine the equivalent short name and
     use it throughout the installation process.

Performing the Installation

     4DOS is distributed using several methods.  This section
     explains how to start the installer in each case.	In all
     cases, see Chapters 4 - 7 if you want a manual installation.

     To start the installation software you can use a command
     prompt, the Run option on the Windows Start menu, or from
     Windows Explorer.

	If you downloaded 4DOS as a .ZIP file, use an unarchiver
	  such as PKUNZIP or InfoZip's UNZIP to extract the files
	  in to the directory you want to install it, and then
	  execute 4DOS.  It will "install itself".

	If you downloaded 4DOS as a self-extracting (SFX) .EXE file
	  instead of the ZIP file, it will extract its files once
	  you run it.  Then, start 4DOS so it can "install itself".

   Installing an Upgrade

     Use the installation instructions below to install an upgrade.
     The installation procedure is essentially the same as when you
     are installing a new copy of the program.

     If you are upgrading from a previous version, you may have a
     4DOS.INI and / or 4START or 4EXIT file in the previous
     version's directory.  To use these files with the new version,
     you must copy them to the new directory, and update the .INI
     file in some cases.  You can allow the installation software
     to perform these steps automatically, or you can perform them
     yourself later (see Chapters 4 - 7 for details).

   Desktop, Registry, and System File Changes

     During installation, some changes can be made to the Windows
     desktop and registry.  These changes:

	Create a JP Software program group on the Start Menu, and
	  include shortcuts in that group to start the command
	  processor and its online help.

	Add a shortcut to the Windows desktop to start the command
	processor.

	Designate the .BTM files (enhanced batch files) used by
	  JP Software products as batch files.	They will then be
	  recognized as such by Windows Explorer.

	Provide an additional "open" option in the context (right
	  mouse button) menu of all batch files, to run the file
	  with 4DOS.

	Create a new entry in the context menu of drives and
	  directories to launch 4DOS in that drive / directory.

     The 4DOS installer may also modify CONFIG.SYS to make 4DOS the
     primary shell.  See chapter 5 for details on performing or
     reversing this step manually if necessary.

Extracting or Repairing Product Files

     If you need to recover or reinstall individual 4DOS files you
     can do so manually, or using the installer.  The methods
     described here can also be used to extract the files you need
     to perform a manual installation.

     You can use an unarchiver like PKUNZIP or InfoZip's UNZIP to
     unzip any individual files from a downloaded .ZIP file.

Uninstalling the Program

     You can't expect that you have trouble using 4DOS, but many
     users like to know how to uninstall a product.  Or you may
     need to remove the program from one system to move it to
     another system.

     If you installed 4DOS using the installation program, go to
     the Windows Control Panel, select Add/Remove Programs, and
     choose one of the following items that you want to uninstall:

       "JP Software 4DOS Registry Extensions (remove only)"
       "JP Software 4DOS shortcuts (remove only)"

     Note that the first one will remove the registry changes which
     designate JP Software's .BTM files as batch files.  These
     registry changes affect all JP Software products.	If you are
     using multiple products and only uninstalling one of them, you
     may not want to remove these registry changes.

     The uninstallation will attempt to reverse all of the changes
     made during installation to your registry.  However, in some
     instances, not all of the steps can be completed.	In this
     case, you will need to perform some of them manually.

     You will also need to uninstall the program manually if you
     did not run the installer to install it.

     See Chapter 5 for manual uninstall instructions.


Chapter 3 / The Help System

4DOS includes complete online help.  This chapter provides a basic
description of how to use the help system, and lists important help
topics.

Using the Help System

     If 4DOS is running, you can start the help system by typing
     HELP (or HELP plus a command name) at the prompt, or by
     pressing the F1 key at any time when the command processor is
     accepting keyboard input at the prompt.  The help system is
     fully cross-referenced, so you can move easily among related
     topics.

     If you type part or all of a command on the command line and
     then press F1, the help system will provide "context-
     sensitive" help by using the first word on the line as a help
     topic.  If the first word is not a valid help topic, you will
     see the Table of Contents.  For example, if you press F1 after
     entering each of the command lines shown below you will get
     the display indicated:

       c:\>		  Table of Contents
       c:\> copy . a:	  Help on COPY
       c:\> c:\util\map   Table of Contents

     If you need help for a command or variable that is not at the
     beginning of the line, position the cursor under (or
     immediately to the right) of the word, and press Ctrl-F1.

     If you type the name of any internal command at the prompt,
     followed by a slash and a question mark [/?] like this

       c:\> copy /?

     you will see help for the command in a quick-reference style.

     Once you've started the help system, you can use a standard
     set of keystrokes or mouse actions to navigate through the
     help text.

     The help system can also be started "manually" (i.e., without
     4DOS running), and contains information which may be helpful
     if you encounter difficulties setting up the program or
     configuring it for your system.  See Chapters 4 - 5 for
     details on starting the help system manually.


Chapter 4 / 4DOS Startup

This chapter explains startup options for 4DOS under various
operating systems.  For additional details on manual installation
and configuration of 4DOS see chapter 5.

Once you have 4DOS installed on your computer, the program is ready
to run.  However, you can configure 4DOS in various ways to suit
your needs and preferences.  Most of the configuration or behavior
is controlled by aliases you create (explained in the online help
and in Chapter 4 of the Reference Manual) and by the .INI file
(explained briefly below, and in detail in the online help and in
Chapter 5 of the Reference Manual).

A few configuration options can also be set on the startup command
line, which is explained here.	In order to understand the startup
command line you will also need to understand primary and secondary
shells, so that topic is covered first.

If you do not need to alter the startup behavior of 4DOS, you can
skip the remainder of this chapter.  If you are using it under any
flavor of Windows, it is recommended that you read this chapter,
since each time you create a desktop object to run the command
interpreter you will have to create a startup command line for that
object.

Primary and Secondary Shells

     4DOS can be run as either a primary or secondary shell.

     Under DOS and Windows 95/98, a primary shell is started from
     the CONFIG.SYS file with a SHELL= command.  Secondary shells
     are started when a program "shells" to the DOS prompt or runs
     a "transient" (temporary) shell to execute a specific command,
     or when you explicitly start a new shell from a desktop object
     under Windows 95/98.

     Whenever you start a primary or secondary shell, you can
     control the way that 4DOS starts by adjusting the startup
     command line.

Command Line Options

     A few of the command-line switches or options that 4DOS
     recognizes are required in certain circumstances; most others
     are needed only if you want finer control over the way the
     program starts.

     The command line that starts 4DOS will typically include the
     program name with drive and path, repeat the name of the
     directory where the program is stored, and finally include any
     switches for the program, for example:

	  e:\4dos\4dos.com e:\4dos /p

     This command line may appear on its own (for example, in a
     Windows desktop object), or in an operating system directive
     (e.g. the SHELL command in the DOS or Windows 95/98 CONFIG.SYS
     file).  Specific details on where you should enter the command
     line for each product are included in Chapters 5 and 6.

     Although the startup command line is usually very simple, you
     can add a number of options if you need to customize the way
     the command interpreter starts.  The complete syntax for the
     4DOS startup command line is:

       d:\path\program [d:\path] [@d:\path\inifile] [//iniline] [/D
       /E:nnnn /F /L /LA /LD /LF /LH /P[:filename] /Y] [[/C | /K]
       command]

     Do not include the square brackets shown in the command line.
     They are there to indicate that the items within the brackets
     are optional.

     If you include any of the options below, you should use them
     in the order that they are described.  If you do not do so,
     you may find that they do not operate properly.

     The following items can be included on the command line:

	    d:\path\program:  The path and name of the executable
	    program file (4DOS.COM).  It is required to start 4DOS.

	    d:\path: This is the second d:\path in the command
	    line above.  It sets the drive and directory where the
	    program is stored, called the COMSPEC path.  4DOS uses
	    this path to find its files and to set the COMSPEC
	    environment variable (see your online help or Reference
	    Manual for more information on COMSPEC).

	    Under 4DOS, this option is generally required for the
	    primary shell, but not for secondary shells.  In some
	    cases, the primary 4DOS shell can find its directory
	    automatically and this option is not needed, but it is
	    recommended that you use it on all primary shells to
	    ensure that the directory is found.

	    If you are running Windows 95/98 and you do not load
	    4DOS as the primary shell in CONFIG.SYS, or if you are
	    running Windows ME, you must use this option in each
	    desktop object or shortcut command line to allow 4DOS
	    to find its files.

	    @d:\path\inifile:  This option sets the path and name
	    of the .INI file.  You don't need this option if you
	    aren't using an .INI file at all, or if the file has
	    the default name (4DOS.INI), and it is either in the
	    same directory as the executable program or in the root
	    directory of the boot drive.  This option is most
	    useful if you want to start the program with a specific
	    and unique .INI file.

	  * //iniline:	This option tells 4DOS to treat the text
	    appearing between the // and the next space or tab as
	    an .INI directive.	The directive should be in the same
	    format as a line in the .INI file, but may not contain
	    spaces, tabs, or comments.	Directives on the command
	    line override any corresponding directive in the .INI
	    file.  This option may be repeated.  It is a convenient
	    way to place a few simple directives on the startup
	    line without having to modify or create a new .INI
	    file.

	  * /D:  This option disables execution of AUTOEXEC.BAT (or
	    the file named in the AutoExecPath directive in
	    4DOS.INI).	It is intended for internal use by DOS and
	    Windows 95/98.  When you press the F8 or Ctrl key
	    during the boot process, MS-DOS prompts whether to run
	    AUTOEXEC.BAT.  If you answer "No", the /D switch is
	    used to relay your choice to 4DOS.

	  * /E:nnnn:  This option sets the size of the environment
	    in bytes.  If you don't use this option, 4DOS will
	    allocate 512 bytes for the environment.  You can use
	    any value from 160 to 32767 as the environment size.
	    For example, to set an environment of 1,000 bytes, you
	    would enter the option as /E:1000.

	    You can also set the environment size with the
	    Environment directive in the 4DOS.INI file (see your
	    online help or Reference Manual).  It is recommended
	    that you use the directive instead of the /E switch, so
	    that all configuration information is kept in one place
	    in the 4DOS.INI file.

	  * /F:  This option tells 4DOS to automatically provide a
	    Fail response to all critical errors, without prompting
	    or waiting for a user response.  It is rarely used
	    except on systems that must run unattended.  Use of
	    this option is not recommended on a normal system,
	    because you will not have a chance to react to a
	    critical error and correct the problem that caused it.
	    For more information on critical errors, see the online
	    help or the Reference Manual.  /F only affects critical
	    errors detected by 4DOS, and will not affect critical
	    error handling for many application programs which
	    perform this function themselves.  It is equivalent to
	    the directive CritFail=Yes in 4DOS.INI.

	  * /L, /LA, /LD, /LF, and /LH:  These options force 4DOS
	    use local alias, directory history, function, and / or
	    command history lists.  They can be used to override
	    any LocalAlias=No, LocalFunctions=No, LocalHistory=No,
	    or LocalDirHistory=No settings in the .INI file.  This
	    allows you to use global lists as the default, but
	    start a specific shell or session with local aliases,
	    functions, or histories.  See your online help or
	    Reference Manual for details on local and global
	    aliases and histories.  /LA forces local aliases, /LD
	    forces local directory history, /LF forces local
	    functions, /LH forces local command history, and /L
	    forces all four.

	  * /P[:filename]:  This option tells 4DOS to load
	    permanently and to run AUTOEXEC.BAT.  If you specify a
	    filename after the /P, that file will be run instead of
	    AUTOEXEC.BAT.  You should specify the full name of the
	    file, including drive and directory.  A filename after
	    /P will override the AutoExecPath option in 4DOS.INI.

	    When 4DOS is loaded from the SHELL= command in
	    CONFIG.SYS it will normally detect that it is the
	    primary shell and set /P automatically.  Under rare
	    circumstances, you may want to load 4DOS permanently
	    and have it run AUTOEXEC.BAT even though it is not
	    loading it from CONFIG.SYS; in such cases you must set
	    /P yourself.  4DOS will not run AUTOEXEC.BAT without
	    either an automatic or an explicit /P.  Do not use this
	    option in secondary shells, or you will be unable to
	    return to the primary shell.

	  * [/C | /K] command:	This option tells 4DOS to run a
	    specific command after starting.  The command will be
	    run after 4START and AUTOEXEC.BAT in a 4DOS primary
	    shell.  The command will be run before the prompt is
	    displayed.	The command can be any valid alias,
	    internal or external command, or batch file.  All other
	    startup options must be placed before the command,
	    because the command interpreter will treat characters
	    after the command as part of the command and not as
	    additional startup options.

	    When the command is preceded by a /C, 4DOS will execute
	    the command and then exit and return to the parent
	    program or the desktop without displaying a prompt.
	    This is sometimes called a "transient" command
	    interpreter session.

	    In 4DOS when it is started as a secondary shell (for
	    example from the Windows desktop), the /K switch has no
	    effect; using it is the same as placing the command
	    (without a /C or /K) at the end of the startup command
	    line.  It is included only for compatibility with
	    COMMAND.COM and CMD.EXE.

	    When you start 4DOS from the SHELL= line in MS-DOS /
	    PC-DOS 6.x and use /K, the command will be executed
	    instead of AUTOEXEC.BAT (for compatibility with MS-DOS
	    / PC-DOS 6.x COMMAND.COM).	This behavior occurs only
	    in MS-DOS / PC-DOS 6.x, not in other DOS versions or in
	    Windows 95/98.

     For example, this command line will start 4DOS, execute any
     4START file you have created, execute the file START.BTM, and
     then display the prompt:

       c:\4dos\4dos.exe c:\4dos\start.btm

Creating or Modifying Startup Files

     4DOS uses two files to control the way it starts:	a file of
     configuration information called the .INI file (named
     4DOS.INI), and a startup batch file called 4START (4START may
     have the extension .BTM or .BAT).

     The .INI file is optional but highly recommended.	It should
     be placed in the same directory as the other files for 4DOS.
     You can edit the .INI file manually with an ASCII editor, or
     you can use the OPTION command to aid you in selecting
     configuration options.

     The 4START file is also optional.	It is executed each time
     4DOS starts, and gives you a convenient way to load aliases
     and environment variables, and otherwise initialize the
     command processor.  4START is normally placed in the same
     directory as the other product files, but this may vary if you
     use the same 4START file for more than one product.

     For complete details on startup files, on the OPTION command,
     and on the 4EXIT file (executed when the command processor
     exits), see the online help or the Reference Manual.

     If you are upgrading from a previous version of 4DOS, you may
     have an .INI file and / or a 4START (or 4EXIT) file in the
     previous version's directory.  To use these files with your
     new version, you must copy them to the new directory, and then
     update any paths in either file that point to the old program
     directory.

Exit Codes

     If you start 4DOS from another program (e.g. to run a batch
     file or internal command), it will return a numeric code to
     the other program when it is finished.  This code is usually
     used to indicate whether the operation performed was
     successful or not, with 0 often indicating success and a non-
     zero value indicating a failure or other numeric result.

     In 4DOS, the exit code is normally the numeric exit code from
     the last external command.  Internal commands do not set the
     exit code.

     If you enter an unknown command the exit code will be 2, which
     is the internal 4DOS "Unknown command" error number.

     In 4DOS, you can use the EXIT n command to explicitly set the
     exit code.  If you do, this will override the rules described
     above, and set the return code to the value in your EXIT
     command.

     The normal rules described above may not return a code that
     indicates the success or failure of the specific operation
     that concerns you.  Therefore, if you need to rely on the exit
     code from 4DOS, it is recommended that you use a batch file or
     alias to create the exit code you want, and then set the code
     explicitly with EXIT n.


Chapter 5 / 4DOS Configuration and Notes

This chapter covers manual installation and configuration of 4DOS.
For information on startup options for 4DOS under various operating
systems see chapter 4.

4DOS works well with virtually all PC hardware; with a wide range
of operating systems and environments, including MS DOS, PC-DOS,
Novell DOS / OpenDOS / DR-DOS, FreeDOS, ROM-DOS, PTS-DOS and most
other DOS variants, Windows 3.x, Windows 95 / 98 / ME, and OS/2;
and with all DOS-based, Windows-based, and OS/2-based networks.
Each environment makes different demands on 4DOS and the user.

4DOS was not designed for and is not recommended for use under
Windows NT, 2000, XP, 2003, Vista, 2008 and 7.  If you are running
such an operating system, use JP Software's more advanced command
processor, Take Command (an evaluation version of Take Command is
available for download at http://jpsoft.com).

This chapter provides the basic information you need to run 4DOS in
any of the standard PC environments.

4DOS Installation Notes

     When installing 4DOS under Windows 95/98/ME, it is strongly
     recommended that you use a short name for the 4DOS directory
     (i.e. a name where each element of the path uses no more than
     eight characters for the name and three characters for the
     extension, with no white space or other special characters).
     If you install 4DOS in a directory with a long name, you will
     have to determine the equivalent short name and use it
     throughout the installation process.

     If you're running DOS 5 or earlier, it is recommended that you
     make a bootable system diskette before you install 4DOS (or
     any other software, for that matter).  This allows you to
     recover in case of a power failure, error, or other
     interruption during the installation process.  See your DOS
     documentation for details about creating a bootable floppy
     disk.

     In DOS 6 and above and in Windows 95/98/ME, a bootable disk
     usually is not necessary because the F5 and F8 keys can be
     used to skip steps in the boot process and recover from errors
     in configuration files.

Manual Installation of 4DOS

     This section is for advanced users, and assumes you are
     generally familiar with CONFIG.SYS, AUTOEXEC.BAT, and other
     concepts such as ASCII editors and batch files.  In most
     cases, manual installation is not necessary because you can
     use the installer.

     In order to install 4DOS manually, you must extract or copy
     the necessary files, create or modify any configuration files
     you need, and then create the necessary commands to start the
     program on your system.

   Extracting or Copying the Program Files

     When you extract or copy the 4DOS files, be sure to place them
     in their own directory, rather than using the same directory
     as a previous version of the program, a directory used by
     other JP Software products, or a directory used by other
     software.

     It is strongly recommend that you place all of the 4DOS files
     in the same directory.  See 4DOS Files and Directories later
     in this chapter for some important considerations if you
     choose not to follow this recommendation.

   Updating CONFIG.SYS and AUTOEXEC.BAT

     (Please Note:  If you installed 4DOS to a directory with a
     long name under Windows 95/98, you must determine the
     equivalent short name for use when updating CONFIG.SYS and
     AUTOEXEC.BAT.  Paths in these files cannot be entered in long
     name format.)

     When you're ready to finish installing 4DOS, you need to add
     one line to your CONFIG.SYS file:

       SHELL=d:\path\4DOS.COM d:\path /P

     "d:\path" means the drive and directory where 4DOS.COM is
     stored.  The second "d:\path" on the SHELL= line should be the
     same as the first, and is used to set the COMSPEC environment
     variable properly.  Be sure to delete or REM out any old
     SHELL= line when you add the new line for 4DOS.

     You can add any command line options to the end of the line.
     See Chapter 4 for information on command line options.

     If you are running 4DOS under DOS 4.01 or earlier, see the
     Compatibility section in the online help for notes on the
     length of the SHELL= line.

     Next, if you are running under DOS (without Windows 95/98/ME),
     add the following line to your AUTOEXEC.BAT file:

       d:\path\KSTACK.COM

     where "d:\path" is the drive and directory where your 4DOS
     files are stored.	KSTACK.COM is a memory-resident program
     used to support the KEYSTACK command.  It requires about 1.5K
     of memory, and can be left out if you do not use KEYSTACK.

     Do not add the KSTACK line to AUTOEXEC.BAT if you are using
     Windows 95/98/ME.	Under these operating systems, KSTACK
     should be loaded separately for each 4DOS session.  Details on
     this are discussed later in this chapter.

     If you have a line in AUTOEXEC.BAT which sets the COMSPEC
     environment variable to point to COMMAND.COM, remove it or REM
     it out.  If you set up the CONFIG.SYS file properly, 4DOS will
     set this variable automatically; setting it in AUTOEXEC.BAT is
     likely to cause trouble later on (for example, if you install
     an update to 4DOS in a different directory, but forget to
     change the COMSPEC setting).

     When you've finished modifying CONFIG.SYS and AUTOEXEC.BAT,
     you can reboot your system to start 4DOS.

   Creating or Copying 4DOS.INI

     It is recommended that you create a 4DOS.INI file with at
     least two lines in it:

       [4DOS]
       InstallPath = d:\path

     where "d:\path" is the drive and directory where your 4DOS
     files are stored (under Windows 95/98/ME, this must be the
     short name of the directory; long names cannot be used).  This
     will help 4DOS locate its auxiliary files, such as the help
     files and OPTION.EXE.  The installer always places these lines
     in 4DOS.INI.  If you need to create the file manually, you can
     do so with any ASCII file editor.	The InstallPath setting
     should be on the first two lines in the file.

     If you are upgrading from a previous version of 4DOS, you
     should copy any 4DOS.INI file you have in the old directory to
     the new one.  Then add or modify the InstallPath directive at
     the beginning of 4DOS.INI, and update any paths in the file
     that point to the old program directory (e.g. 4StartPath).

  4DOS Files and Directories

     It is strongly recommend that you place all 4DOS files in the
     same directory.  If you do not do so, you will have to
     explicitly set the locations of 4DOS files to avoid problems.

     You may feel that you should place 4DOS.COM in the root
     directory because it is a system-related file.  This practice
     is not recommended; 4DOS will run just fine from its own
     directory, and keeping it there makes configuration much
     simpler.

     If you do wish to move files to different directories, the
     following information will help you set up the programs
     correctly:

       4DOS.COM is the 4DOS program file.  It must be in the
       directory specified by the SHELL= line in your DOS or
       Windows 95/98 CONFIG.SYS file, or the directory specified on
       the command line in every desktop object used to start 4DOS.

       4HELP.EXE is the 4DOS help program.  For online help to
       work, this file must be in the 4DOS installation directory
       shown in the InstallPath directive in 4DOS.INI, or in a
       directory included in your PATH.

       4DOS.HLP contains the text for the 4DOS help program.  It
       must be in the same directory as 4HELP.EXE, or in a
       directory included in your PATH.

       KSTACK.COM is the used by the KEYSTACK command.	If you wish
       to use the KEYSTACK command, this file should be loaded in
       your AUTOEXEC.BAT file (under DOS) or separately for each
       4DOS session (under Windows 95/98/ME; details are discussed
       later in this chapter).	This file does not have to be in
       the 4DOS directory.  If KSTACK.COM has not been loaded, you
       will see an error message when you attempt to use the
       KEYSTACK command.

       OPTION.EXE is a utility used by the OPTION command to
       configure 4DOS.	For the OPTION command to work, this file
       must be in the 4DOS installation directory shown in the
       InstallPath directive in 4DOS.INI, or in a directory
       included in your PATH.

  Creating 4DOS Shortcuts and Registry Extensions

     When 4DOS is installed using its installer it can create Start
     menu entries and registry extensions.  The installer can also
     create a desktop shortcut for 4DOS.

     If you need to create a Start menu entries or desktop
     shortcuts manually - for example, if the JP Software group on
     the Start menu is inadvertently damaged or deleted - you can
     use the Windows Explorer's facilities:

	To create additional shortcuts elsewhere on the Start
	  menu, or modify the Programs entries, click the right
	  mouse button in an open area of the Task Bar, and select
	  Properties on the popup menu.  Select the Start Menu
	  Programs tab and modify or adjust the menus as required.

	To create one or more shortcuts on the desktop to run
	  4DOS, click the right mouse button in any open area of
	  the desktop.	On the popup menu, click New, then
	  Shortcut.  Fill in the drive and path as d:\path\4DOS.COM
	  (use the appropriate drive and path for your system).

     You can also put command-line switches, a command, or the name
     of a batch file at the end of the command line for any
     shortcut.	This allows you to run specific commands or set
     configuration options when you start 4DOS from that shortcut.
     For details on the command line options available, see Chapter
     4 and the Starting 4DOS section of the online help.

     For more information on creating and configuring shortcuts or
     modifying the Start Menu, see your Windows documentation.

     If you want to make these changes as a group, or reinstall
     shortcuts and registry extensions without reinstalling 4DOS,
     look at the two registry extension (.INF) files in the 4DOS
     archive.  These files create shortcuts and registry changes
     similar to those made by the installation software.  The
     comments within each file explain how to install and uninstall
     it.

The 4DOS Help System

     The 4DOS help program is called 4HELP.EXE; the help text is
     stored in the file 4DOS.HLP.  The 4DOS help system provides
     complete help for 4DOS commands and features; on most systems
     it can also launch the DOS help program to display help on
     external DOS commands like FORMAT or SORT.

     The section entitled "The 4DOS Help System" within the help
     system itself explains navigation keystrokes and mouse usage
     in more detail, as well as instructions on linking the help
     system to DOS help or other help programs.

     If you do not have 4DOS running, you can start the help system
     by moving into the directory that contains your 4DOS files
     (assuming that you are using C:\4DOS in this example) and
     typing this command:

       c:\4dos> 4help

     You can use this command if you are unable to install 4DOS
     completely for some reason; information in the help system
     will likely help you solve the problem.

4DOS and Your Computer

     4DOS will work on any IBM PC-compatible hardware, regardless
     of the CPU type, amount of memory (assuming the minimum 256K
     or so required to run 4DOS is available), disk configuration,
     or video hardware.  The notes below briefly cover memory,
     video, and disk issues.

   Memory

     4DOS knows how to use XMS memory, EMS memory, and Upper Memory
     Blocks (UMBs) in order to minimize the amount of space it
     takes in the 640K of DOS memory available to your application
     programs.	You can control 4DOS's memory usage with directives
     in the 4DOS.INI file.  For more details about configuring
     4DOS's memory usage see Initialization Directives under .INI
     File Directives in the 4DOS.INI section of the online help.
     You can also set most memory usage options easily from the
     Startup page of the OPTION command's dialogs.

     By default, 4DOS uses normal DOS memory ("low memory") for its
     small resident portion of about 4K.  4DOS can reduce its low
     memory usage by moving most of this information to Upper
     Memory Blocks (UMBs), when requested with UMBLoad and other
     UMB-related directives in the 4DOS.INI file.

     Low memory is also used to hold the larger (about 250K)
     transient portion of 4DOS while your system is at the prompt,
     or executing an internal 4DOS command or batch file.  When an
     external application is running 4DOS moves its transient
     portion to EMS or XMS memory (or the hard disk), so the memory
     is available to the application.  For additional details see
     the online help or the Reference Manual, and in particular the
     documentation on the Swapping directive in 4DOS.INI.

   Video

     4DOS can normally adjust itself to your video hardware
     automatically, regardless of your video adapter and the number
     of rows and columns on your screen.

     Most video problems turn out to be unrelated to 4DOS, and are
     often due to the underlying operating environment (for
     example, attempting to display blinking text in a window when
     the underlying environment does not support this feature).

     If you experience scrolling or color problems, you should also
     check whether you have an ANSI driver installed, and if so
     verify that it is configured correctly and can support your
     video hardware.

   Disk Drives

     4DOS supports all types of disks including floppy disks, hard
     disks, high-capacity removable disks, compressed drives,
     network drives, and RAM disks.  4DOS never directly modifies
     the FAT, root directory, subdirectories, or other system areas
     of the disk, and it doesn't write any data directly to your
     disk.  It always calls on DOS to perform these actions, just
     like most application programs do.  As a result, 4DOS is
     compatible with all disk sizes, formats, and structures that
     your DOS or Windows version supports.

     If you receive unexpected results related to a disk drive or
     disk file (for example, an apparent error in the amount of
     free space on a drive, or an "access denied" message when
     attempting to use a file you thought was available), chances
     are that 4DOS is merely reporting information provided by the
     operating system, and is not the source of the problem.

4DOS and DOS

     4DOS is compatible with MS-DOS or PC-DOS 2.0 and above, DR DOS
     / Novell DOS / OpenDOS 3.4 and above, FreeDOS, ROM-DOS,
     PTS-DOS and most other DOS variants, Windows 95 / 98 / ME (and
     their built-in version of DOS, MS-DOS 7 or 8), and OS/2 DOS
     sessions.	There is additional important information on
     Windows 95/98/ME later in this chapter.

     Detailed information on 4DOS and DOS is covered in the
     Compatibility section of the online help.	If you use any of
     the DOS versions or features listed below, you may want to
     check that topic for additional information.  This is only a
     partial list of the DOS-related items discussed in the online
     help.  Inclusion of an item here does not mean it is
     incompatible with 4DOS, but only that more information on it
     is available in the help system.  The help system includes
     information you may need if you use:

       * Any version of DR DOS, Novell DOS, or OpenDOS.

       * Utilities which allow multiple configurations in your DOS
	  CONFIG.SYS file, including the MS-DOS or Windows 95/98
	  multiple configuration feature.

       * The MS-DOS APPEND utility.

       * The FORMAT /S and SYS commands (used to create a bootable
	  floppy disk) under MS-DOS or PC-DOS version 4.0 or above.

       * The DBLSPACE and DRVSPACE disk compression utilities.

       * The MS-DOS 6.x and Windows 95/98 HELP command.

       * The FASTOPEN utility.

       * The MS-DOS 6.x and Windows 95/98/ME MOVE command.

       * The MS-DOS / PC-DOS 6.x SMARTDRV disk cache.

4DOS and OS/2

     Note that 4OS2 is the preferred command shell for OS/2. It was
     designed for this system, has several OS/2-specific commands
     that 4DOS lacks, and does not suffer from its DOS-imposed
     limitations.

   OS/2 Virtual DOS Machines (VDMs)

     Under OS/2, you can have multiple desktop objects which start
     DOS sessions, also called Virtual DOS Machines (VDMs).  These
     may include objects in the Command Prompts window, objects
     for "migrated applications," objects for DOS and Windows
     applications, and objects for batch files.

     Assuming you set up your VDM objects as described in the
     following section, 4DOS will be loaded as the shell each time
     a DOS session starts.  4DOS will process 4DOS.INI, execute
     your 4START file if you have one, and execute AUTOEXEC.BAT.
     You can start any number of DOS sessions and (within the
     limits of system resources) have as many running
     simultaneously as you like.

     This is fundamentally different from what happens when you
     boot your computer under DOS or Windows 95/98.  In those
     environments there is only one 4DOS primary shell,
     AUTOEXEC.BAT is only executed once each time you boot, and so
     on.

     OS/2 gives you much more flexibility, but that flexibility
     requires planning to get the most out of 4DOS.  For example,
     you can have all your DOS sessions use the same AUTOEXEC.BAT
     file, or you can have different versions of AUTOEXEC.BAT for
     different sessions.  The same is true of the other startup
     and exit files (4DOS.INI, 4START, and 4EXIT).

     Each VDM object contains its own information about how to
     start DOS and 4DOS for that session.  In essence, each object
     has its own CONFIG.SYS file built into it.  The information
     attached to an object which indicates how to start DOS is
     called its DOS Properties or DOS Settings.

     You can modify these settings using the OS/2 Settings or
     Properties notebook for each object.  Use the Program page of
     the notebook to modify the object's program name, startup
     directory, and command line parameters.  The Session page
     lets you set the session type.  Other pages let you adjust
     other configuration data for the object.

     In a new object, each DOS setting starts out with a default
     value taken from your CONFIG.SYS file.  For settings which
     have no corresponding command in CONFIG.SYS, OS/2 uses a
     built-in default value.  The DOS_SHELL setting, which
     specifies the command interpreter to use for a DOS session,
     defaults to the value on the SHELL= line in CONFIG.SYS.

   Creating OS/2 Desktop Objects for 4DOS

     This section assumes you are running OS/2 Warp 4, with the
     default desktop shell and a standard OS/2 desktop.  If you
     are using an earlier version of OS/2 or a different shell, or
     have altered your OS/2 desktop configuration substantially,
     you will need to take those changes into account as you read
     the instructions below.

     The 4DOS installation program normally creates a desktop
     folder which contains an object to start 4DOS from your OS/2
     desktop.  If you want to create additional objects in other
     folders, or directly on the desktop, click mouse button 2 on
     the installed 4DOS object, select Copy on the popup menu, and
     copy the object to another location.  You can then alter the
     properties of the new object if you wish.

     If you need to create a new object for 4DOS, switch to the
     folder where you want the object to appear and either copy an
     existing object (use the Copy or Create Another selection on
     the object's popup menu) or drag a Program Template in from
     the Templates folder.  The new object's Properties notebook
     should open automatically.  Use the Program page of the
     notebook to modify the program name, parameters, and startup
     directory.

     To create a VDM object that gives you a standard 4DOS prompt,
     place an asterisk [*] in the Program Name field.  This tells
     OS/2 to load the command interpreter and go to a prompt
     instead of running a specific application.  Then go to the
     Session page and set the session type to DOS Full Screen or
     DOS Window.

     While you are on the Settings page, click on the DOS
     Properties or DOS Settings button.  4DOS will run properly
     with default DOS properties, but you may want to check that
     the DOS_SHELL setting is correct, because this determines
     which command interpreter OS/2 will load when the object is
     used to start a session.  The DOS_SHELL setting should be set
     as described for the SHELL= line in CONFIG.SYS, for example:

       c:\4dos\4dos.com c:\4dos /p

     If you've set up CONFIG.SYS for 4DOS as described earlier,
     any new VDM objects you create will automatically use the
     correct DOS_SHELL setting for 4DOS.  However, VDM objects
     which existed before you modified CONFIG.SYS may list
     COMMAND.COM in the DOS_SHELL setting.

     You can put command-line switches, a command, or the name of
     a batch file in the Parameters field (on the Program page of
     the notebook) for any object.  This allows you to run
     specific commands or set configuration options when you start
     4DOS from that object.  However, no additional settings are
     required; the only required item is the asterisk to tell OS/2
     to load the default command processor.  For details on the
     command line options available for 4DOS objects see Chapter
     4, and the Starting 4DOS section of the online help.

     If you precede a command name in the Parameters field with
     /C, 4DOS will exit and return to the OS/2 desktop when the
     command is finished.  This is a "temporary" VDM used to
     execute a single command or batch file.  Temporary VDMs are
     also created automatically by OS/2 if you set up an object
     with the Program Name set to the name of a DOS application.

4DOS and Microsoft Windows 95/98/ME

     This section provides basic information on using 4DOS under
     Windows 95, Windows 98, and Windows ME.  For additional
     details see the Compatibility section in the online help.

     4DOS works well as both the primary shell, loaded before
     Windows 95/98, and when loaded from the Windows 95/98 desktop.
     Under Windows ME 4DOS can only be loaded from the desktop, not
     as a primary shell before Windows starts.

     If you are using 4DOS under Windows 95 or Windows 98, it is
     strongly recommended that you install it as the primary shell
     in CONFIG.SYS (this is the way 4DOS is normally installed).
     If you do not install 4DOS as the primary shell, individual
     4DOS sessions will not be able to share global alias and
     history lists.  Each 4DOS session will have to process the
     .INI file before it starts, and if you have two or more 4DOS
     sessions running simultaneously from the Windows desktop, they
     will use more system resources than they would if 4DOS were
     installed as the primary shell.

     If you have a typical Windows configuration, and install 4DOS
     as the primary shell, generally you must have an AUTOEXEC.BAT
     file, even if it only consists of a single REM statement.	In
     most cases, Windows 95/98 will not load the primary shell if
     it cannot find an AUTOEXEC.BAT file in the root directory of
     your boot drive.

   Installing 4DOS Under Windows 95/98/ME

     The 4DOS installation program will install and configure 4DOS
     correctly for Windows 95, 98, and ME.  If you are installing
     4DOS manually, follow the instructions under Manual
     Installation earlier in this chapter.

     If you reinstall Windows 95/98, your SHELL= line will be
     removed from CONFIG.SYS by the Windows installation process.
     To correct this, simply boot the new version and use Notepad
     or another ASCII editor to put the SHELL= line back in
     CONFIG.SYS as described in the manual installation
     instructions earlier in this chapter, then restart Windows.

     If you load Windows 95/98 in "safe mode" your startup files
     (CONFIG.SYS and AUTOEXEC.BAT) are ignored, and 4DOS will not
     be loaded as the primary shell.  If you start Windows in "safe
     mode" use caution if you load 4DOS after the GUI starts.  DOS
     applications sometimes do not work properly in "safe mode."

   Installing the KSTACK Program in Windows 95/98/ME

     If you want to load KSTACK.COM (required for the KEYSTACK
     command) it should be loaded separately for each 4DOS session
     in Windows 95/98/ME.  To do so, include the KSTACK command as
     the last item on the startup command line when you set up the
     corresponding shortcut(s).  For example, the command line for
     your shortcut might read:

       c:\4dos\4dos.com c:\4dos\kstack.com

     This will load KSTACK when 4DOS starts, then display a prompt.

     If you install KSTACK in AUTOEXEC.BAT, it may not work
     properly when multiple 4DOS windows are open, as stacked
     keystrokes may "bleed through" from one window to another.

     You can also address this issue by loading KSTACK in 4START,
     with an IF command to make sure it is not loaded from
     AUTOEXEC.BAT in the primary shell.  To do so, use a line like
     this in 4START:

       if %_shell ne 0 c:\4dos\kstack.com

Using 4DOS on a Network

     This section will give you some tips on using 4DOS on a
     network, and on the proper locations for 4DOS files on a
     network.  For additional details, and any additional
     information about compatibility with your particular network,
     see the Compatibility section in the online help.

     In general, you'll find that you can load and run your network
     software normally under 4DOS.  Network drives will be
     accessible as normal drives once the network is loaded, and
     files on the network will be accessible just as if they were
     on a local hard disk.

     Some networks support file and directory names beginning with
     a double backslash [\\], also called "UNC" names, or with a
     server name followed by a colon, to identify files by their
     location on the network.  4DOS detects such names and passes
     them through to the network unaltered, allowing the network
     software to process them.

     Some networks support server disk partitions that exceed the
     standard FAT16 2 GB partition size limit, but don't provide
     DOS applications with access to information about the drive
     size.  On these drives, 4DOS may not be able to return proper
     free space or total space figures because the drive size
     information returned by DOS is not accurate.  If you have such
     a drive, you may need to use a network or server utility to
     obtain accurate partition size and free space information.

     If you need to boot a diskless workstation from a network
     drive, see the Novell Netware topic under Software in the
     Compatibility section of the online help.	The techniques
     described there will allow you to set your system up under
     Netware to avoid accesses to the boot drive once 4DOS is
     running, and can generally be used for other networks as well.

   4DOS and Novell Netware

     4DOS includes a special 4DOS.INI directive for Netware called
     NetwareNames. You must set NetwareNames = Yes on systems which
     load Netware, in order to avoid problems with destroyed
     environment variables during LOGIN.  See Compatibility in the
     online help for more information.

     4DOS can also be set up to run on Novell Netware diskless
     workstations that boot from the server.  To do so, you must
     make several changes to 4DOS.INI and your other startup files;
     see the Compatibility section of the online help for complete
     details.

Uninstalling 4DOS Manually

     The steps required to remove 4DOS from your system manually
     depend on the operating system you are using:

       * If you are running 4DOS under Windows 95/98/ME, and you
	  installed the 4DOS shortcuts or registry extensions from
	  an .INF file, remove them as described in the file.

       * Next, delete any remaining Windows desktop objects or
	  Start menu entries that refer directly to 4DOS.

       * If you are not running Windows ME (which has a dummy
	  CONFIG.SYS file), find the location of COMMAND.COM on
	  your disk (for example, in the root directory, or the DOS
	  directory).  Then use your editor to edit the CONFIG.SYS
	  file in the root directory of the boot drive.  If you are
	  running DOS 5 or below, before modifying CONFIG.SYS be
	  sure you have a bootable floppy disk.

	 Look for the line which begins with SHELL=, and either
	  delete it, or insert the characters "REM " at the
	  beginning of the line.  Next, add a new line like this:

	    SHELL=d:\path\COMMAND.COM d:\path /P

	  where "d:\path" is the drive and directory for
	  COMMAND.COM (this same directory name is repeated after
	  the full name of COMMAND.COM and before the /P).  If you
	  were previously running COMMAND.COM with a /E:nnnn switch
	  to set the size of your environment, add it to this line
	  as well.

       * After CONFIG.SYS has been modified, edit your
	  AUTOEXEC.BAT file to remove any changes made to
	  accommodate 4DOS.  Look for a command beginning SET
	  COMSPEC= and another which loads the 4DOS file
	  KSTACK.COM.  The SET COMSPEC command will not be present
	  on most systems.  If it's there, remove it, or change it
	  to:

	    SET COMSPEC=d:\path\COMMAND.COM

	  where "d:\path" is replaced by the correct drive and
	  directory for COMMAND.COM.  Then add "REM " in front of
	  the KSTACK.COM command to convert it to a comment, or
	  delete the line entirely.

     Now reboot your system, and you should be back up and running
     under COMMAND.COM.  You can check the 4DOS directory for any
     files you placed there that you want to save.  Then delete the
     4DOS files and remove the 4DOS directory.
